- #Zyxel firmware .bix file install
- #Zyxel firmware .bix file serial
- #Zyxel firmware .bix file drivers
PRE STEP 1 Make a backup of your NAND ! (optionally and only works with more recent asc files so for instance this one u-boot.asc) Wait for U-Boot to load and stop auto-boot process.
It still won't be fast but cuts the waiting game from multiple hours to about 20 minutes. If that makes the upload excruciatingly slow try realterm with the same settings. On windows there are some more caveats, you can try terraterm first, if it does not work, which is indicated by * signs appearing on the prompt try to set a transmit delay of 1 msec/char.
#Zyxel firmware .bix file serial
Serial cable (baud 115200) via „Send File”, cutecom for linux. Upload U-Boot RAM image ( openwrt-lantiq-p2812hnufx_ram-u-boot.asc) using a When CFG 02 UART Popups in terminal You can disconnect/revert bootsel pin to normal or you can wait till the end of process. Short the (R17) bootsel_1 and power on the router. While you are there grab the initramfs (openwrt-lantiq-p2812hnufx_nandtpl-u-boot.img)Īnd wifi calibration data (RT3062.eeprom) as well. Openwrt-lantiq-p2812hnufx_nandtpl-u-boot.img I've seen flashed devices with v21.02.0 crashing, but will boot ok after only adjusting nboot paramter. My v19.07.7 -kernel- builds still fit in 2MB, v21.02.0 gets bigger. (DGDodo, Testing upgrade to v21.02.0 from v19.07.7 without TTL-serial, with accessing_u-boot_environment_variables_in_openwrt and only adjust nboot parameters just before flashing, no mtd-adjustments.
#Zyxel firmware .bix file install
Use this file to update your modem first before updating to snapshot or v19 and above.Īfter you installed this one going back to v18 or below needs a full from scratch install (UART and all) as the start of the root fs has moved 1MB and you will get a kernel panic. To install this larger reservation you need a kernel that is smaller then 2MB ) see the catch 22 here ) in order to solve this issue I had compiled a very barebone image a while ago which has a smaller kernel and this will fit into the 2MB reserved space. However (some) v19 and above + snapshots can be larger and need an adjustment in the reserved space for the kernel. Up to and including v18 the kernel image is smaller than 2MB and will fit in the reserved space of the older working initramfs image. (P.S.) We also have a linksys router that my dad uses for work to work on his laptop but he won't be able to do that now that we don't have Internet.Due to some issues of the initramfs there is a bit of a workaround needed for v19 and above releases. My Internet Provider is: Earthlink and I don't think they will send me another modem since this is the 3rd modem.Ĭan someone please, please, help me A.S.A.P. I already uninstalled Driver Detective and that didn't help either.
#Zyxel firmware .bix file drivers
So, I guess what I'm asking is, is there any drivers and firmware for my Zyxel P-600 series modem? I think if I can get that, then it might work. I've tried resetting it for 30 or more seconds, and that didn't work either.
The Power and Ethernet light juts keeps on blinking but no DSL or Internet light comes on.
I juts got my modem (Zyxel P-600 series) replaced for the 3rd time and It was working fine when I got it yesterday afternoon around 4:30pm-5:00pm and was using and was able to get internet until i decided to download Driver Detective and it scanned all my files and I think that's what messed up my modem.